|
Product Details:
|
| Place Of Origin: | Zhejiang, China (Mainland) | Solar Cell: | Poly 156mm*156mm |
|---|---|---|---|
| Solar Cell: | Poly Crystalline Solar Cell | Backing Color: | White Or Black Or Transparent |
| Frame: | Anodized Aluminium Alloy | Connector: | MC4 Compatible Connector Or Others |
| Material: | Polycrystalline Silicon | Frame Color: | Silvery Or Black |
| High Light: | industrial solar panels,monocrystalline and polycrystalline solar panel |
||
Solar panel refers to a panel designed to absorb the sun's rays as a source of energy for generating
electricity or heating. Solar Photovoltaic panels constitute the solar array of a photovoltaic system that
generates and supplies solar electricity in commercial and residential applications. A single solar module
can produce only a limited amount of power; most installations contain multiple modules.
1. All solar module produces without any aberration or bubble.
2. Back sheet is TPT&PET, and the thickness is 0.3mm.
3. The thickness of EVA is 0.4mm,better than other company use 0.3mm or 0.35mm.We use new EVA
material, not the overdue, the overdue EVA will influence the performance and lifespan of solar panel.
4. New aluminum with 1.00mm thickness, high hardness, good impact resistance. Some company will use
bad recycle aluminum.
5. Tempered glass with 3.2mm has advantages of high strength, impact resistance,good light transmittance.
6. The solar cells made in Taiwan, high efficiency, low attenuation,the attenuation is less than 10% within 5
years and less than 15% within 10 years.
7. The junction box has good waterproof, good anti-aging,PV wire. The PV wire is good for anti-aging and
anti-corrosion, it's better than the normal wire.
8. Package by 7 layers thick carton, moisture proof and anti-cracking. Two pieces in one carton, easy to
delivery.
A polycrystalline solar module is made from a block of silicon that has multiple crystals. These panels are
square in shape, and may have a surface that looks some what like a mosaic. This mix of different crystals
makes the polycrystalline module a good performing type of cell. Polycrystalline solar panels historically
have been a popular choice.
To produce a monocrystalline silicon cells, absolutely pure semiconduction material is necessary.
Monocrystalline rods are extracted from melted silicon and then sawed into thin plates.This production
process guarantees a relatively high level of efficiency silicon and makes monocrystalline panels one of the
most efficient, producing smaller solar cells, and therefore smaller panels. Monocrystalline works very well
in bright cool conditions.
|
Cells type: POLY
|
OL-100W-P
|
OL-150W-P
|
OL-200W-P
|
OL-250W-P
|
OL-300W-P
|
|
Peak Power(PMP)
|
100W
|
150W
|
200W
|
250W
|
300W
|
|
Tolerance
|
± 3%
|
||||
|
Maximum power current(IMP)
|
5.56A
|
8.33A
|
5.56A
|
8.34A
|
8.34A
|
|
Maximum power voltage(VMP)
|
18V
|
18V
|
36V
|
30V
|
36V
|
|
Short-Circuit Current(ISC)
|
5.89A
|
9.58A
|
6.38A
|
9.58A
|
9.58A
|
|
Open-Circuit Voltage(VOC)
|
21.6V
|
21.6V
|
41.6V
|
37.6V
|
41.6V
|
|
Maximum System Voltage
|
1000VDC
|
||||
|
F.F
|
73%
|
||||
|
Module eff.
|
16.8% | 16.8% | 16.8% | 16.7% | 16.9% |
|
All technical data at standard test condition:AM=1.5, E=1000W/㎡, Tc=25℃
|
|||||
| Cells type: MONO | OL-100W-M |
OL150W-M
|
OL-200W-M
|
OL-250W-M
|
OL-300W-M
|
|
Peak Power(PMP)
|
100W
|
150W
|
200W
|
250W
|
300W
|
|
Tolerance
|
± 3%
|
||||
|
Maximum power current(IMP)
|
5.55A
|
8.33A
|
5.56A
|
8.34A
|
8.34A
|
|
Maximum power voltage(VMP)
|
18V
|
18V
|
36V
|
30V
|
36V
|
|
Short-Circuit Current(ISC)
|
6.38A
|
9.58A
|
6.38A
|
9.58A
|
9.58A
|
|
Open-Circuit Voltage(VOC)
|
21.6V
|
21.6V
|
41.6V
|
37.6V
|
41.6V
|
|
Maximum System Voltage
|
1000VDC
|
||||
|
F.F
|
73%
|
||||
|
Module eff.
|
17.6%
|
17.3%
|
17.8%
|
17.5%
|
17.8%
|
|
All technical data at standard test condition:AM=1.5, E=1000W/㎡, Tc=25℃
|
|||||
Glass
Antireflective glass
Translucency of normal luminance is increased by 2%
Module efficiency is increased by 2%
Self-cleaning function
Service life is as long as 25 years (30 years optional)
Solar Cell
High Efficiency PV Cells
Appearance Consistency
Color sorting ensure consistent apperance on each module
Anti-PID
Frame
Conventional frame
Silver or black frames are optional
Boost bearing capability and prolong service life
Serrated-clip design tensile strength
Seal-lip designglue injection
Junction box
Conventional standalone edition and engineering custom edition
Quality diode ensures module running safety
IP67 protection level
Heat dissipation
Long service life
EVA
anti-aging EVA, excellent weathering resistance TPT
Product field:
1. Gird-connected power generation system
2. Off-grid power generation system
3. Building-integrated power generation facilities
We have a wild range of successful project all over the world.
We have advanced ,mature and stable supply production line, support your request on solar market.
Why Choose OLLIN SOLAR?
Quality Focused
“Making Reliable Products” is the core business fundamental of our company. We implement an IEC complied quality system in the production for the unique purpose: OLLIN ONLY DELIVERS RELIABLE SOLAR PRODUCTS.
Customer-centric Services
OLLOM SOLAR rounds out its service portfolio based on every customer’s demands, because we think the customer’s satisfaction is the motive force of growth for the company. Our skilled R&D engineers and customer support teams are always prepared to provide all-round services for our clients.
ISO Accredited Factory
With total area of 15000 m2, OLLIN manufacturing factory operates under the ISO 9001 and ISO 14001 accredited management systems, which ensure the outstanding quality of our solar products and therefore guarantee the benefits of our clients.
System-wide Solutions
In association with partners, OLLIN provides complete components for both on-grid and off-grid PV systems: from solar panels to batteries, combiner boxes, inverters, cables and mounting structures. This enables us to offer more customized PV solutions to our clients based on their various requests.
Professional Team
OLLIN is created and managed by an experienced team recognized for their passion, professionalism and integrity. All of our executives have outstanding background in solar product manufacturing, corporate governance and international marketing. We work together every day for our aspirations: bringing better product experience to the clients, creating a world-wide respected brand and turning the business success of the company into the professional satisfaction of our employees.
Payment
|
Payment Term |
T/T |
EXW |
30% T/T in advance, paid the balance before shipment |
| FOB | |||
| CFR(C&F) |
30% T/T in advance, paid the balance against copy of B/L |
||
| CIF | |||
| L/C | L/C amount above 50,000 usd, we can accept L/C at sight | ||
| West Union |
Amount lower than 5000usd |
||
| West Union | |||
| Delivery Time | 7~10days after receiving payment for one container | ||
Contact Person: Mr. Doug Lee
Tel: +86-18601674686
Fax: 86-574-62566175
